아주 훌륭한 개발자였던 가위보셈군(MiralaTijera)이 자신의 커펌에 처음 만들어서 적용했던 것으로 기억되네요. 홈브류 설치 없이 .self 파일을 부팅시 실행할 수 있는 유틸리티입니다. 이걸 Estwald군이 모든 커펌에 적용되도록 만들었고 이제 Orion군이 그 뒤를 이어 계속 개발하고 있군요. 현재로선 4.41, 4.60, 4.65에서 사용가능하다고 하네요.^^ 지금으로선 대표적인 기능이 바로 팬 컨트롤 유틸을 부팅시 실행하는 것이죠. 그리고 USB 기기가 슬립모드(fall asleep?)로 들어가지 않도록 한다네요.^^
Changelog for System Manager v1.3
- Added payload for CFW 4:41 CEX
- Added payload for CFW 4.60 CEX
- Added payload for CFW 4.65 CEX
Instructions
- Open the rar which you can download from the link below.
(압축 파일을 풀고) - Extract the folder “core_install“, “core_flags” install_core.pkg and “self” on a usb disk.
(설치할 USB 스토리지에 위의 폴더와 pkg, self 파일을 복사하고) - Install the pkg on your CFW.
(일단 pkg를 커펌에서 설치한 후) - Start the pkg with the pen where you extracted the file previously connected into the port closest to the reader.
(블루레이쪽에 위의 스토리지를 꼽은 채 설치된 pkg 파일을 실행하면 돼요) - Immediately after the ps3 will restart and restart again after coldboot (do not worry it is normal).
(그럼 플삼이가 재부팅되고 또 재부팅 되는데 정상이라네요) - Now unplug the stylus and have fun with the fan control utility that will always start when the console starts.
(이제 스토리지를 제거하고 팬 컨트롤 유틸리티를 사용하면 돼요. 플삼이가 켜질때마다 알아서 활성화 되는거죠^^)
Tested Firmwares:
- Ferrox 4.46 CFW – fully functioning.
- Rebug 4:41 CFW / Rogero CFW’s – fully functioning
- Ferrox / Habib 4.60 CFW’s – fully functioning
- NOTE: On CFW REBUG 4.53 (Unofficial) seems to create crash on Startup, Use the Plugin Manager of the System made by me on various including the Cobra CFW rebug 4:53
(코브라펌은 이걸 사용하지 말고 아래의 플러긴을 사용하라네요.^^)
아래는 플랙과 LED라이트의 상태를 설명한 것이에요.^^
Flags | Summary of Current Flags |
boot_on: |
|
boot_off: |
|
install: |
|
Install2: |
|
removesm: |
|
ignoresm: |
|
verbose: |
|
LED Indicators | Description: |
Fixed YellowLED: |
|
LED Yellow /Green flashing: |
|
LED Red /Yellow / Greenflashing |
|
LED remained two seconds every 10: |
|
LEDs for two seconds: |
**This is important to know it, because we should not unplug a USB device in an Act, obviously (hope the LED turns off and turn off a few seconds later) |
시스템 매니저의 다운로드는 여기입니다.^^
코브라펌 유저는 이 시스템 매니저 플러긴을 사용하면 돼요.^^ 플러긴 사용법은 다 아시죠? 파일을 원하는 위치에 복사하고 boot_plugins.txt 파일에 위치를 써 주면 됩니다. 이 파일은 당근 hdd0:/에 복사해 넣어야 하겠죠?^^ 일반펌에선 당근 안돼요. 반드시 코브라펌 유저만 사용하세요.^^
LED Indicators | Description: |
Fixed Yellow LED: |
|
LED Yellow / Greenflashing: |
|
LED Red / Yellow / Greenflashing |
|
플러긴 다운로드는 여기입니다.^^
출처는 여기입니다.^^